Dryer drum drive belt, 89-1/2 inches long, 4 ribs
Jempro Appliance Parts offers our customer OEM dryer parts at competitive prices. Availlable for local pickup in the Miami area and shpping within the continental US.
-
Idler pulley wheel with spacer and retainer clip -
Lint Filter -
Lint Filter Assembly -
Dryer replacement heating element kit. Comes with 2 coils, 4 insulators, and 6 coil supports and instructions. Manufacturer Number WE11X10007 -
Replacement General Electric Dryer Element. Heating element restring kit used on some GE brands electric clothes dryers. Includes dual coil element and instructions. -
WE12X10014 GE dryer belt Replaces WE12X42 WE12X42P WE12X42R WE12X82 WE12X82E WE12X82P WE12X82R A genuine General Electric part -
This one-time use safety thermostat has a limit of 325 degrees Fahrenheit. One this thermostat trips, you will have to replace it. -
Cycling thermostat with bias heater, L140-10F -
Dryer blower wheel 131476300, is used on Frigidaire, Tappan, Westinghouse, Gibson, Tappan, Kelvinator, some Crosley, and GE dryers. It is is 8 and 1/4 inches by 2 and 1/2 inches. -
Frigidaire dryer belt. This is a 4H 87.5" long belt. Fits new Frigidaire dryers which are considered reversing dryers. -
This thermal fuse limiter, with a limit of 220 degrees Fahrenheit, is manufactured for both gas and electric clothes dryers. Once the internal temperature of the dryer reaches 220 degrees, the heating element cuts out. -
Sale!
Heater restring coil can be used on some models of Frigidaire Dryers including: Tappan, Westinghouse, Gibson and other brands. -
Use this idler pulley assembly with gas or electric clothes dryer that has a flat dryer belt.
-
Dryer belt length 87 3/4”, width 1/2”, characteristics, flat -
Lint Trap Assembly
-
Belt length 28 3/4”, width 1/2”, characteristics, small “v”- shaped for, three-speed washer This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood. -
This thermal fuse is mounted on either the heating element or burner tube housing. -
Belt length 91 5/8”, width 5/16”, characteristics, 5 ridges, flat. -
Cycling thermostats continually cycle the heating element off and on to maintain a constant inner temperature. This particular cycling thermostat has a limit of 155 degrees Fahrenheit and a differential of 25 degrees. Meaning that with this thermostat, the heating element will cut out at 155 degrees and cycle back on once the internal temperature drops by 25 degrees. -
This part is a one time use thermal fuse which attaches to the blower wheel housing of your clothes dryer. It cannot be re-set and must be replaced when continuity between the pins is no longer present. Terminal size is 3/16 of an inch. -
This part is a one time use thermal fuse cannot be re-set and must be replaced when continuity between the pins is no longer present. -
This hi-limit thermostat acts as as safety mechanism that keeps the dryer from overheating. Once the dryer temperature reaches 250 degrees Farenheit, this piece will shut down power to the heating element until it drops by 80 degrees Farenheit. -
At 93-3/8" inches in length, this dryer drum belt has five ridges. It is all black in color and is made entirely of rubber. A flat belt, it is 3/8 of an inch wide. -
Meant as a backup to a high limit thermostat, this fuse is typically set to trip at a higher temperature than that of a high limit thermostat. This is a one time use fuse, so when it does trip, you do need to replace it. It's letting you know that something is wrong with your dryer. -
New Dryer Heating Element 4391960 Whirlpool, Roper, Kenmore, Maytag 5200 Watts 240V New heating element for Whirlpool and Kenmore electric clothes dryers. The element is held in heater housing by single 5/16 inch metal screw. This dryer element is oftenly located in the right rear corner of the dryer. Common new style dryer heating element. Dryer heater 4391960 also fits dryer brands like Kenmore Whirlpool, Amana, Maytag. -
This lint filter screen has two side guides on either side of the screen. One measures 3/8 of an inch wide, while the other measures 5/8 of an inch wide. -
Idler pulley wheel and bearing -
This idler pulley assembly provides the tension required for a multi-ribbed belt. It also serves to help the belt to rotate the drum. This arm is what attaches to the idler pulley wheel. -
This is a brand new Whirlpool Genuine blower wheel. It is used in full sized dryers made by Whirlpool including Sears Kenmore & Roper, among others. It usually works on dryers with a 29" wide cabinet. -
This heating element consists of two pieces: a metal tube and a coil. The heater coil will heat up and glow red to produce heat for the dryer. If there is no heat to your dryer the heater may need to be replaced. -
Flat drum belt has 5 ribs (or bumps) and 4 grooves(or valleys). It is 100" long and 3/8" wide. This dryer belt is used on Maytag, Magic Chef, Norge, along with some other brands. -
Heating element coil to re-string element assembly, 240 Volt -
Kit includes heating element thermal cut-out (309 degrees), as well as a 250 degree high-limit thermostat. The kit has flat heaters with jumper wires. -
Kit includes heating element thermal cut-out (309 degrees), as well as a 250 degree high-limit thermostat. The kit has flat heaters with jumper wires. -
Sale!
The motor has 1-3/4" blower, 1-3/4" drive shafts, and a pulley. The blower screws directly onto the motor shaft with a left-hand thread. It works on Whirlpool, Kenmore, Roper, KitchenAid, and other brands.
