-
Meant as a backup to a high limit thermostat, this fuse is typically set to trip at a higher temperature than that of a high limit thermostat. This is a one time use fuse, so when it does trip, you do need to replace it. It's letting you know that something is wrong with your dryer. -
New Dryer Heating Element 4391960 Whirlpool, Roper, Kenmore, Maytag 5200 Watts 240V New heating element for Whirlpool and Kenmore electric clothes dryers. The element is held in heater housing by single 5/16 inch metal screw. This dryer element is oftenly located in the right rear corner of the dryer. Common new style dryer heating element. Dryer heater 4391960 also fits dryer brands like Kenmore Whirlpool, Amana, Maytag. -
This lint filter screen has two side guides on either side of the screen. One measures 3/8 of an inch wide, while the other measures 5/8 of an inch wide. -
Idler pulley wheel and bearing -
This idler pulley assembly provides the tension required for a multi-ribbed belt. It also serves to help the belt to rotate the drum. This arm is what attaches to the idler pulley wheel. -
This is a brand new Whirlpool Genuine blower wheel. It is used in full sized dryers made by Whirlpool including Sears Kenmore & Roper, among others. It usually works on dryers with a 29" wide cabinet. -
This heating element consists of two pieces: a metal tube and a coil. The heater coil will heat up and glow red to produce heat for the dryer. If there is no heat to your dryer the heater may need to be replaced. -
Flat drum belt has 5 ribs (or bumps) and 4 grooves(or valleys). It is 100" long and 3/8" wide. This dryer belt is used on Maytag, Magic Chef, Norge, along with some other brands. -
Heating element coil to re-string element assembly, 240 Volt -
Kit includes heating element thermal cut-out (309 degrees), as well as a 250 degree high-limit thermostat. The kit has flat heaters with jumper wires. -
Kit includes heating element thermal cut-out (309 degrees), as well as a 250 degree high-limit thermostat. The kit has flat heaters with jumper wires. -
Sale!
The motor has 1-3/4" blower, 1-3/4" drive shafts, and a pulley. The blower screws directly onto the motor shaft with a left-hand thread. It works on Whirlpool, Kenmore, Roper, KitchenAid, and other brands.
Call Jamie for Expert Solutions: 305-522-0496
