This coupling kit is used between the motor and the transmission on direct drive washers with no belt. This is the newer version and is made with new metal sleeves for added strength.
This kit includes the motor, clips and terminal connectors. This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
This condenser fan motor operates in a clockwise fashion. It comes with screws, a blade mounting nut, and a cushion. This motor carries 2 watts, 115 volts, and is used for some refrigerators. This part provides forced-air cooling for the condenser coil.
Evaporator fan motor 5303918549, is used on Frigidaire made refrigerators and freezers including Frigidaire, Tappan, White Westinghouse, Gibson, Kelvinator, some GE and Kenmore
This heating element is a partially open style bake element. Carrying 240 volts and 2000 watts, it is 19-1/4 inches wide by 15 inches long. The two 90 degree male spade terminals are 13-3/4 inches apart.
Size: 18 1/4 inches wide X 15 1/4 inches deep (from bracket to front of element). Element extends approx. 2 1/4 inches past bracket to the terminals. Rated at 220 volts and 2300 watts.
This flat style gas oven igniter is 5.53 inches long and comes with a bracket and wire nuts. Its amperage range is between 3.2 and 3.6 amps. May be different in appearance but will function as the orginal part.
This gas oven ignter is a little over three inches long. It has a white ceramic base and a gray silicon carbide igniter. This igniter assembly comes with its own metallic mounting bracket, and an eight inch long wire lead with a plastic plug.
Belt length 28 3/4”, width 1/2”, characteristics, small “v”- shaped for, three-speed washer
This part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Kenmore, Admiral, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.
This idler pulley assembly provides the tension required for a multi-ribbed belt. It also serves to help the belt to rotate the drum. This arm is what attaches to the idler pulley wheel.
At 93-3/8" inches in length, this dryer drum belt has five ridges. It is all black in color and is made entirely of rubber. A flat belt, it is 3/8 of an inch wide.
This heating element consists of two pieces: a metal tube and a coil. The heater coil will heat up and glow red to produce heat for the dryer. If there is no heat to your dryer the heater may need to be replaced.
This refrigerator defrost timer will cycle for twenty-one minutes after every six hours of run time. Use it for your Frigidaire/WCI brand refrigerator.
This refrigerator defrost timer will cycle for twenty-five minutes after every six hours of run time. The timer itself is made of plastic, but its terminals are bent and the leads are external.