-
THIS WHIRLPOOLÂ W10290353Â 6" BLACK BURNER BOWL IS DESIGNED TO WORK WITH MANY WHIRLPOOL APPLIANCES. -
This surface burner with reinforced delta frame carries 1250 watts and 240 volts. -
This heating element consists of two pieces: a metal tube and a coil. The heater coil will heat up and glow red to produce heat for the dryer. If there is no heat to your dryer the heater may need to be replaced. -
Flat drum belt has 5 ribs (or bumps) and 4 grooves(or valleys). It is 100" long and 3/8" wide. This dryer belt is used on Maytag, Magic Chef, Norge, along with some other brands. -
Heating element coil to re-string element assembly, 240 Volt -
This ice maker kit features a large, removable bin that is filled automatically and stops filling once the bin is full. The kit includes the ice maker assembly, fill tubes, water valve, removable ice bin, wiring harness, mounting hardware and instructions. -
This kit includes the motor, clips and terminal connectors. This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated. -
Surface Burner Receptacle used on some Maytag brands electric ranges and cook tops. -
12400035 Flat Ignitor for Gas Ovens. Replaces 98005652. Fits many brands. Silicon Carbide hot surface ignitor. Works on Whirlpool, Roper, Maytag, Amana, Caloric, Frigidaire, Kenmore and many more with gas valves that operate within 2.9-3.2 Amps. -
This part has two ports for water to enter. It is blue and is intended for use with many washing machines and comes with a multi-mount bracket and an outlet adaptor. -
This V-style pump belt is typically used with washing machines that use two belts. This belt is about forty and a half inches long and 3/8 of an inch wide. -
This V-style pump belt is typically used with washing machines that use two belts. This belt is about forty-one and a half inches long and 3/8 of an inch wide. -
This is a Genuine OEM Whirlpool Refrigerator Ice Maker Assembly. Used for Whirlpool - KitchenAid - Kenmore(106.series) 25-27 Cu. Ft. Side by Side Models with Vertical Ice Dispenser in the Freezer Door! Alt. Part Number 2198597, 626663 , W10122502. For 22 Cu. Ft. Models, Use Part # W10190961. -
Direct drive washing machine pump for Amana and Speed Queen washers. 2 Port with 3 mounting posts. -
Kit includes heating element thermal cut-out (309 degrees), as well as a 250 degree high-limit thermostat. The kit has flat heaters with jumper wires. -
Kit includes heating element thermal cut-out (309 degrees), as well as a 250 degree high-limit thermostat. The kit has flat heaters with jumper wires. -
Sale!
The motor has 1-3/4" blower, 1-3/4" drive shafts, and a pulley. The blower screws directly onto the motor shaft with a left-hand thread. It works on Whirlpool, Kenmore, Roper, KitchenAid, and other brands. -
Sale!
Heating Element used on late model Whirlpool/Kenmore brands electric clothes dryers. 5200 Watt 240V. This is the manufacturer replacement for the following part number(s): 3398064, 3403585, 3398066, 8565582, PS334313, 279838-PK -
This coupling kit is used between the motor and the transmission on direct drive washers with no belt. This is the newer version and is made with new metal sleeves for added strength. -
Water inlet valve for direct-drive models from Whirlpool, Kenmore, KitchenAid, Roper, and other brands. It receives a 3/8" hose, has 2 hose threads, and could be green or blue in color. -
WHIRLPOOL WASHING MACHINE COUPLING -
This high limit thermostat has a limit of 260 degrees Fahrenheit. Meaning that it will cut out when the internal dryer temperature reaches 260. This thermostat cuts back in when the temperature drops by 70 degrees Fahrenheit. -
Brand new, Whirlpool Genuine FSP connector receptacle kit 330031. This kit comes with 2 universal brackets, a plastic-bake-a-lite block that the burners plug into, 2 wire leads from the block that measure 6-1/2" long, 2 pieces of heat shrink tubing and 2 porcelain wire nuts to make the splice connections. It's everything you need to fix those dangerous and stubborn connections! -
This part attaches to the exhaust duct of your clothes dryer. -
Dryer lint screen for most standard capacity dryers with pull-out lint screens, measures 17 5/8" x 7 1/8"
-
Measures 92 inches in total length, has 4 ribs, and is 1/4" wide. Replaces most belts for full sized dryers made by Whirlpool including Sears Kenmore & Roper, among others. -
This is a brand new original-equivalent pump, comes fully boxed and guaranteed. This pump usually fits machines which have only one belt. Check the positioning of the drain outlets to match your pump. -
This valve has a 3/8" outlet with rubber adapter to convert to 1/2". This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed. -
This valve has two ports for water to enter. This valve is compatible with a half inch ID hose and it has two 3/4-11x1/2 NHT hose threads. -
This is a basic ice maker that is a replacement for the Whirlpool icemaker 4317943 without the extra harnesses. Is can be used to replace icemakers on a majority of refrigerators in use today including Whirlpool, KitchenAid, Roper, Estate, Sub Zero, Sears, Maytag, Amana, Jenn Air, Magic Chef, Speed Queen, Admiral, Norge, Crosley, Kirkland and Kenmore 106.series refrigerators. -
Double Outlet Water Valve Kit used on most Whirlpool/Kenmore and Cold Spot refrigerator model with Icemaker and Water thru the door. Kit includes multiple mounting brackets which allows it to fit all domestic brands. -
Single outlet valve kit used on all Whirlpool/Kenmore and Cold Spot refrigerator models with conventional ice maker only. Kit includes multiple mounting brackets which allows it to fit all domestic brands. -
Whirlpool Refrigerator Adaptive Defrost Control 4388932 is a Whirlpool OEM repair part. The 4388932 is used on Whirlpool, Kenmore, KitchenAid, Jenn-Air, Maytag, Roper, other refrigerators. Replacement for 2154958, 2154985, 2169267, 2169269, 2188159, 2303824, 4388932, 483187. -
Evaporator Fan Motor Assembly used on some Whirlpool/Kenmore brands refrigerators. This is the manufacturer replacement for the following part number(s): W10131845, 2188303, 2162404 -
This refrigerator evaporator fan motor kit comes with a wiring harness and a four-inch push on fan blade.
-
Evaporator (freezer) fan motor kit with fan blade
Call Jamie for Expert Solutions: 305-522-0496
